Fuel-fired Tilting Crucible Furnaces

Fuel-fired Tilting Crucible Furnaces
T max 1200 °C and 1400 °C

Information

: TAG 570/12/K

Oil- or gas-fired
Rugged furnace design
Safe, reliable pouring using 2 hydraulic cylinders with end bearing dampers on tilting frame
Precision dosing at every tilting angle
High melting rate
Low energy consumption of approx. 1.3 kWh / kg Al
Very low heat loss due to excellent thermal insulation
High-quality burner technology
Uniform heating of melt and crucible > Good metal quality and crucible life
Heat-resistant cast-iron ring on removable refractory concrete cover protects crucible against mechanical damage and allows easy access for crucible change
Emergency outlet drain
Optional operating platform
Exhaust discharged over rim of crucible, side exhaust available as optional extra

Technical Data

Model	Crucible	Capacity kg Al kg Cu		Melting rate* [kg/h Al at 700°C]	Melting rate* [kg/h Cu at 1000°C]	Burner power [kW]	T max [°C]	Outside dimensions [mm] A1 A2 B C				Weight [kg]
TAG 180/12/K	TP 287	180	550	220	-	300	1200	2900	2100	1600	1350	1800
TAG 330/12/K	TP 412	330	970	240	-	300	1200	3000	2200	1700	1530	2200
TAG 370/12/K	TP 412H	370	1200	260	-	300	1200	3000	2200	1700	1630	2400
TAG 570/12/K	TP 587	570	-	400	-	390	1200	3200	2400	2100	1670	2600
TAG 750/12/K	TBN 800	750	-	420	-	450	1200	3300	2500	2250	1770	2900
TAG 1000/12/K	TBN 1100	1000	-	450	-	450	1200	3300	2500	2250	1950	3300

TKG 400/14/K	TP 723	120	400	-	330	400	1400	2800	2000	1600	1400	2300
TKG 500/14/K	TP 843	150	500	-	360	400	1400	2800	2000	1600	1400	2500
TKG 600/14/K	TP 287	180	600	-	380	400	1400	2900	2100	1600	1400	2700

Other sizes on request · * The melting rates depend on crucible conductivity and specific operating conditions. Approx. 80% is achieved under normal conditions.