Electrically heated Bale-out Furnaces

Electrically heated Bale-out Furnaces
T max 1100 °C, 1200 °C and 1300 °C

Information

: TA 200/11

Rugged casing construction
Compact construction > Easy access to metal bath
Friendly working conditions due to excellent thermal insulation
Low energy consumption, low operating costs (approx. 0.4 kWh/kg aluminium)
High-quality heating elements wound on ceramic tubes > Free heat radiation onto crucible, low energy consumption, longer service life of heating elements
Uniform heating of melt and crucible due to heating from 4 sides, superb metal quality, good crucible life
Heat-resistant cast-iron ring on removable refractory concrete cover protects crucible against mechanical damage and allows easy access for crucible change
Emergency outlet drain
Cable harness between control panel and furnace protected by flexible metal conduit, providing optimum protection against mechanical damage
Low maintenance costs

Furnaces also supplied for holding only (with lower power ratings).

Technical Data

Model	Crucible	Melting rate* [kg/h Al at 700°C]	Melting rate* [kg/h Cu at 1000°C]	Power [kW]	T max [°C]	Outside dimensions [mm] A B C			Voltage	Weight [kg]
TA 30/11	A 70	35	-	18	1100	860	860	810	400 3/N	500
TA 50/11	A 150	45	-	21	1100	860	860	870	400 3/N	570
TA 100/11	A 300	60	-	27	1100	1010	1010	910	400 3/N	710
TA 200/11	BU 200	130	-	53	1100	1160	1160	950	400 3/N	810
TA 300/11	BU 300	140	-	63	1100	1210	1210	1050	400 3/N	1070
TA 350/11	BU 350	160	-	68	1100	1210	1210	1270	400 3/N	1120
TA 500/11	BU 500	170	-	72	1100	1390	1390	1270	400 3/N	1300
TA 600/11	BU 600	210	-	82	1100	1390	1390	1420	400 3/N	1420
TA 800/11	BU 800	260	-	102	1100	1430	1430	1490	400 3/N	2300

TK 70/12	A 70	35	50	18	1200	860	860	810	400 3/N	720
TK 150/12	A 150	45	65	21	1200	860	860	870	400 3/N	790
TK 300/12	A 300	60	85	27	1200	1010	1010	910	400 3/N	920
TK 500/12	BU 200	130	195	53	1200	1160	1160	950	400 3/N	1150

TK 70/13	A 70	35	50	18	1300	860	860	810	400 3/N	720
TK 150/13	A 150	45	65	21	1300	860	860	870	400 3/N	790
TK 300/13	A 300	60	85	27	1300	1010	1010	910	400 3/N	920
TK 500/13	BU 200	130	195	53	1300	1160	1160	950	400 3/N	1150

Other sizes on request · * The melting rates depend on crucible conductivity and specific operating conditions. Approx. 80% is achieved under normal conditions.