High-temperature combi-furnaces up to 1750 °C

Combi-furnaces for debinding and sintering
High-temperature chamber furnaces with air preheating and safety equipment -
T max. 1600 °C - 1750 °C

HTK 70/16 DB – HTK 300/17 DB

High-temperature chamber furnaces as combifurnaces with up to 300 l volume and T max. 1750 °C
Air preheating: preheated air is blown horizontally into the furnace at temperatures up to max. 500 °C
Automatic transition to sintering process up to the maximum temperature
Double-walled housing with forced cooling, hence very low outer-wall temperatures
Furnace insulation made of high-quality aluminium oxide fibre materials with low thermal mass, extremely rapid heat-up and cooling possible
With reinforced bottom and level base for stacking, to protect the insulation and for receiving heavy loads
Automatic control of exhaust flaps, with separate exhaust pipes and stainless steel exhaust hood
Multi-zone furnace regulation with separate additional controller for fresh air preheating
Fully automatic system regulation by Siemens PLC S7-300

Furnace system for debinding and sintering ceramic components up to 1600 °C

High-temperature debinding furnace with fresh air preheating
Automatic control of exhaust flaps, with separate exhaust pipes and stainless steel exhaust hood
Ready for controlled atmosphere operation
Automatic cooling system

Model	T max [°C]	Inner dimensions [mm] [Width x Depth x Height]	Volume [l]	Outer dimensions [mm] [Width x Depth x Height]	Power [kW]	Voltage [V]	Weight [kg]
HTK 70/16 DB	1600	400 x 400 x 400	64	1020 x 755 x 1710	19	400 V 3/N	535
HTK 160/16 DB	1600	500 x 550 x 550	150	1120 x 905 x 1860	25	400 V 3/N	800
HTK 300/16 DB	1600	500 x 1100 x 550	300	1120 x 1455 x 1860	50	400 V 3/N	1200

HTK 70/17 DB	1750	400 x 400 x 400	64	1020 x 755 x 1710	19	400 V 3/N	545
HTK 160/17 DB	1750	500 x 550 x 550	150	1120 x 905 x 1860	25	400 V 3/N	800
HTK 300/17 DB	1750	500 x 1100 x 550	300	1120 x 1455 x 1860	50	400 V 3/N	1200